Selected quantity exceeds what is currently available

Vacuum Breaker Kit #1729

by Marble Products
Selected quantity exceeds what is currently available

Vacuum Breaker Kit #1729

by Marble Products
SBS-926120
$99.00
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 71ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
  • Equipment ships free, exclusions apply* Dimension of Receiver: 3-1/4" × 2-3/4"

    A Marble Products Vacuum Breaker Kit is a one way valve that saves the integrity of the fresh water system by NOT allowing contaminate water (water contaminated with perm solution, neutralizer, hair color, etc.) from mixing with the fresh water system that we drink. Consult your local plumber and building codes for need of this product. National Plumbing Code Number: ASSE 1001.

     

    Kit Includes: Vacuum Breaker, Hose Receiver,and Hose to Fixture to Breaker.

     

    ⚠WARNING: Cancer and Reproductive Harm-www.P65Warning.ca.gov

  • We're sorry, this product cannot ship to the following locations: Canada, Puerto Rico, Alaska, Hawaii

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 41ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};

Will this vacuum breaker work on a Pibbs sink?

Asked by: cherylbart
on PIBBS 5300 PORCELAIN SHAMPOO BOWL or any sink with the same hold pattern yes
Answered by: steve s
Date published: 2018-08-09

Where is this product made/manufactured? Is it compliant in Wisconsin?

Asked by: msmary13
I had to return it. It was not compliant in Schofield, Wi.
Answered by: ike33100
Date published: 2018-04-26

Will this Vacuum Breaker Kit #1729 fit a Belvedere sink??? Does the brass pipe nipples come with vacuum breaker?

Asked by: Pete Coz
Yes , 1/4 brass nipples (2 pcs)
Answered by: Lisa Beauty Salon
Date published: 2018-04-07

Is this vacume breaker a universal part?

Asked by: Donna Genito
yes , the look is not universal . any vac breaker properly installed will have the same protection as this vac.breaker, but it also has a build spray head holder and mount on to the sink cleanly . not all vac breakers do that. so by choosing another va.breaker you will loose the finish look this has.
Answered by: steve s
Date published: 2017-09-29

How do you tighten the vacuum breaker to the shampoo sink?

Asked by: Kathy
There are two posts beneath the vacuum breaker for the inlet and outlet water. If the sink is thin & the vacuum breaker is still loose, you may need to add a few washers to the inlet and outlet water posts to increase the width of the bolts so you are able to get a snug fit.
Answered by: fizz water
Date published: 2018-10-21

Why is my vacuum breaker leaking ?

Asked by: Hairs Your Glory
The vacuum breaker poppet might be worn out or there might be something blocking the poppet from rising up to close when water runs thru. If you remove the two screws, you can take off the hood (cap) and hood bracket. The hood bracket houses the poppet (white round disc w/ hole in middle w/ red rubber washer). Remove hood bracket by carefully twisting it. Buy a repair kit & replace entire assembly.
Answered by: fizz water
Date published: 2018-09-20

I have a marble product MEA469-90M size 1/2 (05136)N388 do you still carry in stock?

Asked by: Susansam

is the portion that sits on top of the sink and accepts the hose plastic or metal?

Asked by: CynthiaAnn
  • y_2019, m_3, d_23, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_SBS-926120, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sallybeauty
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 135ms
  • questions, product