Charging/Recharging:

• Prior to first use, fully charge unit (approximately 2 hours to fully charge).
• The charging LED Indicator Light will illuminate while unit is charging.
• When charging is complete, the LED Indicator Light will turn OFF.

Speed Modes & Directions Use

• When switched ON, the top of the unit will illuminate.
• It is recommended to always start on the Low setting.
• The first click upward to the single circle is the FORWARD Direction, Low Speed.
• The second click upward to the double circles is the FORWARD Direction, High Speed.
• The first click downward to the single circle is the REVERSE Direction, Low Speed.
• The second click downward to the double circles is the REVERSE Direction, High Speed.
• Choose the setting that directs nail dust/debris away from your hand. For best results, use light pressure and only on dry nails.
• If you experience a sensitive reaction, discontinue use immediately

Installing and removing the heads

• Make sure the unit is turned OFF.
• Remove protective cover.
• To remove, pull the head straight out from the unit.
• Place a new head into the unit and press down firmly.
• Check that the new head is firmly in place (not loose or shaky) before turning the unit on.

• Prior to first use, become familiar with the heads, speed modes, and directions.
• Only use on nails that are completely dry.
• If there is a sensitive reaction, discontinue use immediately.
• Use on nails only – do not use on other body parts.
• Replace protective cover when not in use.
• Replace all heads to the storage case when not in use.