Prepare your workspace:
1. Place the warmer on a level, heat-resistant, and clutter-free surface. To prevent damage to furniture, place a towel or paper towel underneath the warmer.
2. Place a folded paper towel into the bottom of the bowl to cover the bottom.
3. Pour just enough acetone into the ceramic bowl to cover the nail surface. More may be required if you are removing a pedicure.
4. (Optional) Place the lid securely on the bowl.

Start the Magic Manicure Remover:
1. Insert the plug into the wall outlet.
2. Turn on. The indicator light should illuminate to signify the heating element turning on.
3. Wait for the acetone to warm up to a comfortable warm temperature. Warming times will vary based on how much acetone is in the bowl and the ambient temperature.
4. While the warmer is heating, prep nails as needed for removal.

Prepare the Nails:
Proper nail prep before soaking is important to reduce soak times.
1. Clip nail extensions using a nail clipper to remove excess length.
2. File off top layers of the product using a gritty nail file. File back and forth across the nail until you remove most of the bulk. It’s recommended to use a fresh, sharp nail file to make the process more efficient.
3. Apply Blissful Blooms Cuticle Oil or hand cream on the skin around the nails. This prevents residue from sticking to your skin and keeps cuticles from drying out.

Soak Off:
1. Once the acetone has reached a warm temperature to the touch, submerge your fingers in the acetone inside the ceramic bowl.
2. Check on the progress from time to time, but it should not take more than a few minutes for the product to begin dissolving.
3. For stubborn acrylic, gel, or dip, withdraw your nails from the acetone and use the scraper tool to gently scrape off the product towards the tip of the nail.
4. To speed up removal, gently rub your nails against the paper towel placed at the bottom of the ceramic bowl and wipe off dissolved product as needed. (Optional)
5. Re-soak your nails as needed until all the product is fully dissolved off the nail.

Additional Tips:

1. During the removal process, it is important to be gentle and patient. Never force, pick, or peel the product off the natural nail. Picking can cause damage to your natural nails.
2. Unlike nail polish, dip powder and gel polish are long-lasting manicures and can only be removed with a good quality cosmetic acetone. For best results, use the Nailboo Pro Soak Acetone Remover or any other 100% pure cosmetic grade acetone.
3. When setting up your workspace, place a protective barrier on your desk to protect your desk from acetone. If possible, select a set-up with a surface that is resistant to heat and chemicals, including acetone. Laminate or glass surfaces, for example, are often more resistant to damage than wood.

Cleaning & Storage:
1. Turn off and unplug the device. Let the device fully cool before handling, cleaning, or storage.
2. Use a clean paper towel to soak and place it in a separate plastic bag for disposal. Never pour damage plumbing.
3. Using a clean paper towel, wipe of the ceramic bowl. If needed, rinse with water and allow to fully dry.
4. Using a clean paper towel the sides of the heating element can be wiped down. Never submerge the heating element in water.
5. Store the warmer and bowl in a children and pets.

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING
Always connect to a polarized outlet (one slot is wider than the other). Turn off and unplug the Magic Manicure Remover while not in use and before cleaning. When using an electrical device, basic precautions should be observed, including the following:

WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Keep away from children and pets. THIS PRODUCT IS NOT A TOY. THIS PRODUCT IS NOT INTENDED FOR CHILDREN.
• FOR EXTERNAL USE ONLY
• Do not leave the device unattended while it is plugged in.
• Turn off the device when it reaches a comfortable, warm temperature.
• Unplug the device when it is not in use and before cleaning.
• Do not pull on the cord to disconnect. Firmly grip the plug and pull from the wall outlet.
• CAUTION: Warming plate is HOT. Do not touch while in use. Do not allow the hot plate to come in contact with the skin. Allow the device to fully cool before cleaning and storage.
• Do not move the device when supporting a bowl of heated liquid.
• Use in a well ventilated area.
• Do not attempt to repair this device yourself. Contact Nailboo support in case of any issues.
• Do not use the device for any purposes other than the intended use.
• Do not operate if the device is not working properly or if any part has been damaged in any manner.
• Do not use this device if the power cord is frayed, damaged, or if any bare wires are exposed.
• Do not allow acetone to come into contact with the heating place to prevent damage.
• Do not allow cord to hang over the edge of a table or counter or to touch hot surfaces.
• To protect against the risk of electrical shock do not put the cord or plug in water or any other liquid.
• Do not use outdoors. This is intended for indoor use.
• Do not use the device on an unstable surface.
• Acetone is extremely flammable so keep away from contact with a heat source, i.e. flame, and cigarettes.
• Keep away from flammable materials.
• Do not improperly dispose of the device.

THIS DEVICE HAS A POLARIZED PLUG To reduce the risk of electrical shock, this device has a polarized plug (one blade is wider than the other). This plug will fit in any polarized outlet only one way. If the plug does not fully fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. Do not attempt to insert the plug in an incompatible outlet.