CHROME POWDER: Silica, CI77891 (Titanium Dioxide)

ALCOHOL PREP PAD: Isopropyl Alcohol

Start with clean, prepped nails and apply your favorite ASP Gel Polish color. Cure completely.

1. Apply a thin, even layer of ASP No Wipe Gel Top Coat and cure completely for 60 seconds in an LED lamp.
2. Pick up a small amount of Glass Chrome with the sponge applicator. A little goes a long way.
3. Firmly rub the chrome into the nail. Continue buffing the chrome in until the loose shimmer transforms into a smooth, highly reflective, glass-like finish.
4. If you can still see loose particles, continue buffing rather than adding more powder.
5. Use a soft brush to gently remove all excess chrome from the nail and surrounding area.
6. Seal the entire nail with ASP No Wipe Gel Top Coat by gently floating the brush over the chrome finish, making sure to cap the free edge. Cure for 60 seconds LED or 2 minutes UV.

ASP Glass Chrome Effect adds depth, dimension, and a high-end editorial look to any manicure. The technique is achieved by applying chrome powder onto a cured NO cleanse Top coat and gently rubbing it in with a sponge or applicator until the surface becomes mirror-like. The chrome is then sealed with gel top coat to lock in the shine and protect the design.

Your base color changes the finished Glass Chrome effect. Try it over different ASP Gel Polish shades to create everything from soft pearlescent finishes to bold, reflective looks. For the smoothest result, use less powder and buff more, the chrome should look polished and reflective before you apply your final top coat. Please note, not all Gel Top Coats provide a reflective finish with chrome powders. We recommend ASP No Wipe Top Coat for best results.