STEP 1: PREP 
Wash hands with soap and water. 
Shape nails and push back cuticles.  
Use enclosed Prep Pad to ensure nails are clear from oils and residue.  
Make sure your nails are completely dry before application.   

Pro Tip: Because GLAZE is an all-in-one product, no additional Base Coat or Nail Strengthener is needed. 

 STEP 2: SELECT SIZE  
Hold the sheet over nail to find your size. If you are in between sizes, always size down.   

STEP 3: REMOVE FILM
Remove the protective film.

STEP 4: APPLY
Gently lift strip from sheet starting from edge. 
Place strip over the center of your nail, starting at cuticle line and pressing outward. For optimal adhesion, the strip should be placed above the cuticle line avoiding skin or cuticles. 

STEP 5: PRESS  
Press down firmly from center and side to side.   

STEP 6: TRIM  
Trim strip flush to your nails using nail scissors or nail clippers. 

STEP 7: CURE  
Press the button at the back of the lamp 
First insert four fingers under the lamp and cure. Next insert thumb and cure separately.  
Cure under LED light for 60 seconds.   

Pro Tip: To activate two-timer function quickly push button for 45 second cure. For a 60 second cure, hold down button for 3 seconds.  

STEP 8: FILE 
Position the nail file horizontally along the contour of your nail. With one sweeping motion, file firmly across your free edge. Make sure GLAZE does not exceed beyond your nail length. Any overhang will cause chipping or cracking.  

Pro Tip: Using the wooden manicure stick gently press down on glaze strip thoroughly to seal all edges before curing. This will prevent hair and debris from catching onto the nail strip perimeter.   

How To Remove:

STEP 1: REMOVE  
Apply cuticle oil on nail bed.   

STEP 2: LIFT  
Use manicure stick to gently and slowly lift nail strip from corner of the cuticle area.  
Gradually push the strip off your nail. CAUTION: Do not peel off with force or in one quick motion.