METAL TOPPER: DI-HEMA TRIMETHYLHEXYL DICARBAMATE, ISOPROPYLIDENEDIPHENYL BISOXYHYDROXYPROPYL ACRYLATE, ACRYLATES COPOLYMER, DIETHYLENE GLYCOL DIMETHACRYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, POLYSILICONE-11, TIN OXIDE, IRON POWDER.

MAY CONTAIN: TITANIUM DIOXIDE, IRON OXIDES, RED 7, ULTRAMARINES, CHROMIUM OXIDE GREEN, POLYETHYLENE TEREPHTHALATE, POLYURETHANE 33, ALUMINUM POWDER, SYNTHETIC FLUORPHLOGOPITE. REAL BLACK, RED DELICIOUS/BASIL/FORTUNE.

JELLY: DI-HEMA TRIMETHYLHEXYL DICARBAMATE, ISOPROPYLIDENEDIPHENYL BISOXYHYDROXYPROPYL ACRYLATE, ACRYLATES COPOLYMER, DIETHYLENE GLYCOL DIMETHACRYLATE, TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE, POLYSILICONE-11, TIN OXIDE.

MAY CONTAIN: TITANIUM DIOXIDE, IRON OXIDES, RED 7, CI 77007, POLYETHYLENE TEREPHTHALATE, POLYURETHANE 33, ALUMINUM POWDER, SYNTHETIC FLUORPHLOGOPITE.

PREP PAD: ISOPROPYL ALCOHOL, WATER/AQUA/EAU.

STEP 1: PREP 

• Clean nails with soap and water.  
• Trim or file nails (using white side of included nail file) to desired length and shape.  
• Push back cuticles using the included manicure stick. 
• Lightly buff nail beds using the included white mini buffer to remove natural shine and create subtle texture. 
• Remove any oils and residue from nails using the included prep pad and let dry.
• If you have split, bent, or chipped nails: Gently file to smooth and reshape.
• Trim off damaged area of nail, if possible, to maximize wear.
• Then continue with prep steps to ensure proper adhesion of the gel.

STEP 2:  APPLY ONE GEL COLOR (BLACK)

• Shake bottle well before use. 
• Pick up a small amount of polish on the brush and apply one ultra-thin coat of gel polish to nails. 
• Press button on the back of lamp to activate LED light. 
• Cure nails for 60 seconds.  Ensure all four fingers are placed under the light. Lamp will automatically turn off after 60 seconds.  

NOTE: The lamp fits four fingers at a time. Cure thumb separately. 

STEP 3: APPLY MAGNETIC TOPPER OVER COLOR

• Shake bottle well to mix up magnetic particles.
• ONE NAIL AT A TIME:
  • Apply one coat of gel polish.
  • Activate 3D magnetic effect with Power Magnet Tool.
  • Cure immediately to lock in effect before moving onto next nail.

HOW TO USE THE POWER MAGNET TOOL

• Using a vertical motion, hover the flat side of the magnet about 1 inch away from your nail, slightly moving side to side along either the left or right side of your nail bed. 
• Once desired effect is created, repeat on the other side of the nail bed. 
• To finish, hover the magnet at the free edge of your nail bed, completing a classic velvet effect. 
  • Visit dashingdiva.com for additional looks and how-to videos.
  • If desired outcome is not achieved or a mistake is made, run the brush over polish to reset magnetic particles.
  • For additional intensity of the magnetic effect, apply an ultra-thin first coat (do not use the Power Magnet Tool), cure, then apply a second coat following the above instructions.

PRO TIP: Be sure to cap your free edge with polish to ensure longer-lasting wear and the strongest hold. Visit dashingdiva.com for additional looks and how-to videos.

STEP 4: CURE MAGNETIC TOPPER

After each nail, complete the following:

• Press button on the back of lamp to activate LED light.
• Cure for 60 seconds.* *Lamp will automatically turn off after 60 seconds.

PRO TIP: To ensure proper curing, please use the included One Gel LED Lamp. One Gel is not compatible with the Dashing Diva Glaze Lamp.

STEP 5: APPLY ONE GEL JELLY COLOR

• Shake bottle well before use. 
• Pick up a small amount of polish on the brush and apply one coat of gel polish to nails. 
• Press button on the back of lamp to activate LED light. 
• Cure nails for 60 seconds (lamp will automatically turn off after 60 seconds).

NOTE: The lamp fits four fingers at a time, ensure all four fingers are placed under the light. Cure thumb separately. And your Jelly Glass mani is complete! Your nails look amazing.

REMOVE WITH ONE GEL MAGIC OFF, SOLD SEPARATELY. 

Jelly Glass Nails in 4 Steps:

1. Prep nails.
2. Apply & cure Black Polish.
3. Apply, activate, cure Magnetic Topper.
4. Apply & cure Jelly Color to complete the look.