Operating Instructions:

• This appliance is intended for household use only.
• This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way.
• If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Do not attempt to defeat this safety feature.

IMPORTANT: During the first few minutes of initial use, you may notice smoke and a slight odor. This is normal and is not a cause for concern.

Start-up:

• Plug the iron into an electrical outlet and slide the On / Off Switch to the “On” position.
• Allow the appliance at least 60 seconds heating time. Caution: Curling irons with Rheostat Control Dials operate at high temperatures when used on high settings.
• When using for the first time, begin with the LOWEST setting. Please read all instructions carefully before using.

For best results, follow these guidelines:

•  280 ˚F - 330 ˚F For fine, thin hair
• 330 ˚F - 380 ˚F For normal, medium-textured hair
• 380 ˚F - 430 ˚F For wavy, thick, coarse hair

Helpful Styling Hints

• Hair should be clean and dried completely before using any styling tool.
• Comb out a 2-inch section of hair and place hair ends between the Barrel and Clamp. The Clamp should be on top of the hair.
• Using one hand to hold the Cool Tip and the other to hold the curling iron Handle, roll under for a curl and over for a flip.
• Leave the iron in fine hair for 5 to 8 seconds, and 10 to 15 seconds for thick hair.
• Press Thumb Grip to release hair.
• Allow curls to cool before combing or brushing.
• When styling is complete, slide the “On / Off” Switch to the “Off” position. Unplug the appliance and allow it to cool before storing.